Search the site

New and used machines for processing wood and plastic, from the best brands.

Home / Wood machinery - Used / CNC BORING - MILLING CENTER

CNC BORING - MILLING CENTER

BREMA

GLR - Norme CE
Code 0151

CNC vertical working centre with rollers for drilling, milling, shaping and automatic insertion of any hardware insert to obtain the workpiece ready for final assembly of the furniture - CE Standard

  • Technical data:
  • The high flexibility of this system allows to reduce big stocks and big stores and eliminate dead-times  for setting up boring machines. Different units and toolings can be mounted allowing to obtain mass-produced or made to order pieces, which are divided according to their dimensions or colour only 
  •  
  • Composition:
  • Vertical panel store with automatic panel drawing
  • Roller connection device 
  • Roller loading device 
  • 8-position revolver head where 8 different heads can be mounted, complete with vacuum device - The electronic part can control from 5 to 11 axis depending on the equipment
  • Hardware insertion units: each group is equipped with a PLC programm for the control of the whole inserting cycle
  • Fowarding roller device
  • Automatic panel returning device 

CNC BORING - MILLING CENTER

ALBERTI

BASIC PLUS CN - Norme CE
Code 0382

CNC working  centre for furniture and fittings – CE Standard

  • Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles
  •  
  • Panel dimensions:
  • Max 3000 x 1200 x 60 mm
  • Min 300 x 110 x 15 mm (automatic loading/unloading)
  • Min 300 x 110 x 8 mm (manual loading/unloading)
  •  
  • Monoblock configuration with independent spindles:
  • N° 16 independent vertical spindles with centre-to-centre distance  32 mm , along the Y-axis (Assembly)
  • N° 3 horizontal drilling heads, with dual output in  X direction  pitch 32 mm and vertical presser, mounted on the side of the monoblock
  • N° 10 independent vertical spindles with centre-to-centre 32 mm  arranged along the X axis (Fitting)
  • N° 1 horizontal drilling head with dual output in Y direction and vertical presser
  •  
  • Workbench configuration:
  • Loading roller section with straight PVC-coated rollers
  • Useful length for panel support 2000 mm
  • Useful width for panel support 840 mm
  • Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm
  • Work surface height 920 mm, adjustable +/- 30 mm
  • Discharge roller section with straight PVC-coated rollers
  • Useful length for panel support 2000 mm
  • Useful width for panel support 840 mm
  • Panel guide bar with automatic positioning movement
  • Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders
  • Vacuum pump 40 m³
  •  
  • Milling unit“Electric spindle”  9 Hp
  • Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm –  N°1 HSK-63F  right included
  •  
  • Automatic tool changer

  • Equipped with 4 positions for the automatic retrieval of tools with max  diameter 40 mm. Includes a set of 4 shanks for  taper ISO 30 . Compatible with milling unit – N°  taper HSK-63 included

  • Circular blade unit:

  • Composed by independent motor 1,8 Hp,  speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm

  • Control panel and numerical control unit Mod. ALBNT (TPA):  operating system Windows XP - ALBATROS TPA software

  • Installed power 12 Kw

  • Compressed air 6/7 bar

  • Extraction: speed 30 m/s - Flow rate 8686 m³/h

  • Overall dimensions: see attached sheet

  • Weight kg 3500 

CNC BORING - MILLING CENTER

BIESSE

SKIPPER 100 - Norme CE
Code 0231

CNC working  center for furniture, kitchens, custom furniture, panels and various - CE Standard - Year 2006

  • Technical data:
  • 3-axis (x-y-z) CNC working center - swan neck machine
  • Movable panel, fixed working head - panel horizontally
  • Integral protection of the working head and with emergency front carpets
  • Numerical control with biesseworks software
  • Infeed table (with motorized belts) left
  • N. 2 panel fixing clamps (for their introduction into the working area)
  • Outfeed table (with motorized belts) right
  • Useful (maximum) working area (x - y - z) mm 3000 x 1000 x 60
  • Dimensions (minimum) workpieces that can be machined (x - y - z) mm 90 x 70 x 8
  • Dimensions (maximum) workpieces that can be machined (x - y - z) mm 3000 x 1000 x 60 (for panels longer than mm 2000, the minimum thickness becomes mm 13)
  • Total installed power (kw) 20 (approx.)
  •  
  • Lower working units:
  • N. 1 vertical electro spindle hsk d-50 (power  Hp 4,8) with inverter
  • N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter
  • N. 29 vertical drilling spindles
  • N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis)
  •  
  • Upper working units:
  • N. 1 vertical electro spindle hsk d-50(power  Hp 4,8) with inverter
  • N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter
  • N. 29 vertical drilling spindles
  • N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis)
  •  
  • Transfer for panel loading and unloading: structure made of aluminum profiles, belt-driven table for panel translation/lifting bar
  • BiesseWorks machining programming system
  • Compressed air 7/8 bar
  • Total power Kw 20
  • Overall dimensions - (see attachment)
  • Machine weight kg 2700

 

 

 

 

CNC BORING - MILLING CENTER

BREMA

GLV/M 2800 X 1000 - Norme CE
Code 0148

CNC working  center for furniture, kitchens, cabinets, panels, and various - CE Standard

  • Vacuum system for clamping the panel with manually adjustable suction cups. Such a system allows machining of the workpiece on all its sides. In addition, the 8 tools mounted in the revolver head, perform any type of machining required.
  • Useful panel working dimension with all tools : Length mm 2800 - Height mm 1000
  • N° 3 controlled axis
  • Numerical control CNC/90
  • Compressed air 6-7 bar
  • Power Kw 15
  • Overall dimensions mm 4280 x 2200 x 2480 h
  • Weight kg 4900

CNC BORING - MILLING CENTER

THEOREMA

BR 3000 SPECIAL - Norme CE
Code 0409
€ 2000,00
CNC boring  and pantograph working centre with 3 controlled axis for furniture, kitchens, bathroom furniture, panels, doors and miscellaneous - CE standard
  • Technical data:
  • Minimum overall dimensions
  • Useful length X axis mm 3000
  • Useful length Y axis mm 1300
  • X axis speed mt/min 24
  • Y axis speed mt/min 24
  • Z axis stroke mm 65
  • Max panel thickness mm 65
  • Boring unit with n° 18 spindles - Right-left drill chuck diameter mm 10 - Rpm 4000
  • Pantograph with pneumatic tool release - Motor Hp 7,5 - Rpm 0/18000 - Inverter for spindle Kw 5,5
  • Nesting worktable
  • Suction cups mm 150 x 150
  • Rapid panel positioning
  • Optimisation of the drilling path
  • Specularity of drilling and milling cycles
  • Interpolation on three X-Y-Z axis
  • Vacuum pump cubic metres 100
  • Compressed air atm 6
  • Overall dimensions: mm 4400 x 1700 x 2400 h
  • Weight kg 1200
  •  
  • MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND
  • NOT RECONDITIONED

WOOD MACHINERY - USED

* Required fields

Privacy Policy