CNC boring and milling centre for panels, furniture in general, made-to-measure furniture, kitchens, bathroom furniture and miscellaneous - CE Standard

  • Working width min mm 130 - max mm 1000
  • Working length min mm 300 - max unlimited
  • Working thickness min mm 8 - max mm 50
  • Working table height mm 905
  • X axis speed 90 mt/min
  • Y axis speed 30 mt/min
  • Z axis speed 15 mt/min
  • Head composition
  • Boring unit Kw 1,5 - rpm 3200 - composed of: 
  • N° 13 vertical boring spindles ( 7 on Y axis - 6 on X axis )
  • N° 4 horizontal drilling spindles on X axis
  • N° 2 horizontal drilling spindles on Y axis 
  • Milling unit - power Kw 4,4 - Spindles  rpm 4000/17700  - diameter 20 mm - max. working length 120 mm. 
  • Circular saw unit integrated in the boring head - diameter mm 125
  • Compressed air connection 6/8 bar
  • Absorbed power 12 Kw 
  • Diameter of suction ports mm 160
  • Overall dimensions: mm 2700 x 1600 x 1700 h
  • Weight kg 1300

 

Electrospindle 

  • Technical data:
  •  Tool holder attachment HSK E63
  • Nominal power Kw 14 
  • Automatic tool clamping device  with pneumatic piston
  • Long nose
  • Nominal Voltage 380V
  • N° Poles 4
  • Ceramic front bearings 
  • Steel rear bearings 
  • Lifetime bearing lubrication
  • Max rpm 15.000
  • Steel electrospindle body 
  • Liquid cooling
  • Weight 58 kg
     

Numerical control point to point boring machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes - CE Standard

  • Boring head with 5 independent vertical chucks and 1 double horizontal chuck
  • Saw for longitudinal cuts
  • Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size
  • Possibility of boring 2800 mm panels
  • Pneumatic tool displacement mm 60
  • Max panel thickness mm 50
  • Spindles rotation rpm 4500
  • Saw rotation rpm 6000
  • Vacuum pump motor Hp 1,5
  • Vacuum cup diameter mm 80
  • Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips
  • Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes
  • Polycarbonate safety hood
  • Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850
  • Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

 

Vertical CNC  boring -  milling center  - CE Standard  - Year  2007

  • Working phase: 
  • The pre-loading phase prepares the panel,  which is positioned  in vertical position, so it can be fed into the machine . Once the panel is in the machine, it is locked by a chuck system. It is then pulled by the driving gear , the sliding roller which it leans on .  At this point the revolver, which contains the head with the tools, starts the working phase . After this last operation is finished, the panel can be fed out of the machine 
  • The machine can work on the following types of panels:
  • solid wood and its by-products 
  • particleboard
  • fiber board
  • multi-layer
  • aluminium
  • aluminium and wood 
  • plastic
  • Panel dimensions :  lenght unlimited - width min/max mm 20/800 - thickness min/max  mm 5/100
  • Description: 
  • Driving gear : 
  • In the working program this component represents the movement along the X axis. Everything is powered by a  brushless motor , which is provided with an encoder  that monitors  the positions : this allows the PC to accurately control the movement of the axis  
  • Chucks : 
  • These components are mobile systems that block the panel by using rollers positioned along thre main axis. Two types of chucks are available: vertical chuck and horizontal chuck, which is divided into an upper and lower section.  The first leans on the top of the panel,   and holds it against the driving gear ; the others push on the back of the panel and hold it against a series of fixed rollers placed in front. 
  • Revolver: 
  • With  10 heads    -   Power  Kw 5,6
  • Drilling head : 
  • With   6 + 6 horizontal spindles - Power  Kw 3 
  • Lubrification system 
  • Power  Kw 15
  • Pneumatic system supply   pressure 6/7 bar 
  • Suction :  n° 2  valves  diameter  80 - n° 1 diameter 160 
  • Overall dimensions : mm  2500  x 1950 x 2550 h (  for transport  2300 h ) 
  • Weight kg 3300

 

 

3-axis CNC drilling and milling centre for furniture, custom-made furniture, kitchens, bathroom furniture, wooden materials, composite materials, plastics and various - CE standard - Year 2004

  • Technical data:
  • Working table mm 3060 x 1300 
  • Z axis stroke mm 200
  • Programmable speed in X axis mt 40/min
  • Programmable speed in Y axis mt 45/min
  • Programmable speed in Z axis mt 22,5/min
  • No. 8 worktables L 1300 with 24 suction cups 
  • Pneumatic load assist device
  • Additional stop for capacity in X mm 3800
  • Laser device for positioning suction cups 
  • Electrospindle  9 Hp
  • HSK 63 taper with 6-position tool-holder magazine for automatic tool change
  • Spindle rotation speed 1500/24000 rpm - Motor power 9 Hp from 12000 to 18000 rpm - Rotation speed control from CNC by inverter - Right/left rotation
  • FANLESS cooling system (without fan)
  • Rear magazine with 4 positions
  • Horizontal milling unit
  • with 2 outlets for mounting 2 opposed horizontal cylindrical cutters
  • Motor power Hp 4
  • Spindle rotation speed 6000/14000 rpm controlled by CNC
  • Right rotation
  • Fan cooling system
  • Drilling unit
  • 15 vertical spindles ( 9  X direction - 7  Y direction)
  • 2 + 2 horizontal spindles  X direction
  • 1 + 1 horizontal spindles  Y direction
  • Centre distance mm 32
  • Spindle taper M 10
  • Spindle speed 4000 min
  • Motor power Hp 3
  • Z axis vertical stroke mm 200
  • Pneumatic vertical stroke of each spindle mm 60
  • Disc milling unit
  • Cutter diameter mm 160 - Rotation speed 3000 rpm - Pneumatic vertical stroke 60 mm - Motor power Hp 3
  • Automatic centralised lubrication device
  • Working pressure 7 bar
  • Vacuum pump for workpiece clamping 
  • Software SCM Xilog Plus - Features: configuration of the machine and tools through the easy and intuitive screen. Direct import of dxf and xxl files, programming of macros of parametric programs. Linear and circular interpolation in the three planes X - Y - Z
  • Overall dimensions of assembled machine: mm 4200 x 2600 x 2650 h 
  • Overall dimensions for transport: mm 4200 x 2200 x 2200 h
  • Weight kg 3200

 

Technical Assistance

We guarantee an efficient service performed by specialized technicians.

Delivery

Delivery service carried out by the company or a courier service. If required we also perform assembly and testing.

Inspection of used machines

Inspection, replacement of worn parts, modifications necessary for adherence to current regulations, paintwork.

Can't find the machine you're looking for? Contact us now! +39 031 712 275 tomesani{0}tomesani.it